News Digest:12 inch large particle dredge pump is sold in China, dredge pump for sale, china dredge pump, China large particle sand dredge pump (also known as gravel pump, sand pump) is mainly used for long distance transportation of strong abrasive materials that ar
12 inch large particle dredge pump is sold in China
China large particle sand dredge pump (also known as gravel pump, sand pump) is mainly used for long distance transportation of strong abrasive materials that are too large for the general sand pump to transport. Large particle sand pump is suitable for dredger dredging, pumping sand, sand pumping, mining and metal smelting and blasting. Because of its good performance, it is also widely used in dredging and dredging in inland rivers.
China dredge pump is going to sold to work in the river sand mining project. The sand suction pump used before is made of ordinary cast iron, which has poor wear resistance and low efficiency of sand discharge. The sand in the local river is thick and has pebbles. Pumps of ordinary materials can not withstand the impact of large particles, and are easily worn or even damaged. China dredge pump client contacted the technical staff of our factory through a friend's introduction. After communicating the situation on the spot, the technicians of our factory recommended the 12-inch large-grain sand-absorbent pump as the main pump for sand absorption. This model of sand-absorbent pump, Firstly, the material is made of high-chromium alloy wear-resistant material, which has strong abrasion resistance, and the main over-flow parts such as the whole pump casing and impeller guard plate are thickened, which is especially suitable for the extraction of coarse sand and large particle working conditions. Secondly, this type of suction The sand pump has good pass-ability, the number of blades is three blades, and the maximum discontinuity can reach 22 cm through the particles. Generally, no blockage occurs, even if the pebbles are slightly larger, they will not get stuck. China dredge pump client was very interested in this 12-inch large-particle sand pump, and immediately signed a contract to pay the deposit. There is a 450 hp diesel engine on site that just matches. The hull space is limited, and the matching gear box connection space is blocked. It is recommended that the customer support the pulley connection. The on-site master informs the technicians of the factory of the diameter of the diesel engine end shaft and the size of the key. The technician selects the D-type 10-slot pulley connection according to the matching diesel engine power. After determining the specific plan, the workshop organizes the production and delivers it to the customer within the specified time.
Large particle suction pump parameters
·Flow rate: 1200 cubic meters / hour
· Lift: 35 meters
·Supporting power: 330KW
· Pump model: 14/12
· Maximum over-flow particles: 220 mm
· Supporting pipe: 12 inch PE pipe
Do Pump specializes in R&D, production and sales of large particle sand pump, sand pump, mud pump and other equipment. In particular, he has extensive experience in dredging, sand mining and embankment. We focus on sand pump for 20 years, providing not only high-quality products and industry-wide solutions, but also on-site installation services. Please contact us if you have any plans for dredging and sand absorption.
