News Digest:submersible sand pump, china dredge pump, slurry pump parts, 5 Tips of China sand pump bearing maintenance, China Do Pump is a manufacturer of sand pump. dredge pump, electric submersible sand pump and hydraulic submersible dredge pump with relative dredg
5 Tips of China sand pump bearing maintenance
China Do Pump is a manufacturer of sand pump. dredge pump, electric submersible sand pump and hydraulic submersible dredge pump with relative dredging equipment, such as on board dredge pump, ladder dredge pump, booster sand pump.For more dredging pump solutions related to Tips of China sand pump bearing maintenance, here are the answers:
The sand pump is divided into two types: a horizontal sand pump and a vertical sand pump. Using sand pump, today DO PUMP takes everyone to understand the method of bearing maintenance of sand pump.
1. Periodically check the wear depth of the shaft hole. If the wear depth is less than 4mm in the diameter direction, use a power tool to grind the position to be repaired. Do not grind the surface of the shaft hole too lightly, the rougher the better.
2.Position the bearing. The simple method is to assemble the shaft and the bearing together with glue. After finding the accuracy, it will be maintained at this position until the repair agent is cured. When the conditions permit, you can use the three-point gasket positioning method or make fixture positioning and assembly.
3. When the repair agent is directly applied to the outer ring of the sand pump pump bearing, only the rear half of the outer ring of the bearing is sufficient. The coating amount should ensure that there is no shortage of glue between the outer ring of the bearing and the shaft hole, and repair Fill the gap completely.
4. Use a cleaning agent to clean the surface of the bearing hole to be repaired. A thin layer of release agent can be applied to the outer ring of the bearing, and a sand suction pump to facilitate future disassembly of the bearing.
5.After the maintenance is completed, push the repaired bearing into the shaft hole.
China Do Pump is a manufacturer of sand pump. dredge pump, electric submersible sand pump and hydraulic submersible dredge pump with relative dredging equipment.For more dredging pump solutions related to Tips of China sand pump bearing maintenance, contact Sand Pump Manufacturer China Do Pump at info@dopumpgroup.com or call us at +8615031104888.
