What are the reasons for bearing overheating during slurry pump work?
China Do Pump is a slurry pump solution provider, sand pump. dredge pump, electric submersible sand pump and hydraulic submersible dredge pump with relative dredging equipment.Slurry Pump solutions-What are the reasons for bearing overheating during slurry pump work?
Occasionally, the slurry pump will encounter bearing heating during use. The common problems that generally cause the slurry pump bearing heating are the following five aspects:
1. If the cold water is not turned on or the cooling water tank is blocked, the cooling water function should be turned on or the cooling water channel should be cleared.
2. The equipment is not well lubricated. The amount of lubricating oil should be adjusted according to the instructions.
3. The lubricating oil is not clean and there are impurities in the oil. The bearings should be cleaned and the lubricant should be changed.
4. The thrust bearing is in the wrong direction. According to the inlet pressure, adjust the thrust bearing direction.
5. The bearing air outlet is blocked, which causes the hot air in the bearing box to not be discharged, which increases the temperature of the equipment. The air outlet should be cleaned.
What are the reasons for bearing overheating during slurry pump work? China Do Pump is a manufacturer of sand pump, dredge pump, slurry pump, including electric submersible slurry pump, hydraulic submersible slurry pump, ladder pump, boost pump, on board dredge pump. Submersible sand pump etc.
Slurry Pump solutions-What are the reasons for bearing overheating during slurry pump work?, contact China Do Pump at info@dopumpgroup.com or call us at +8615031104888.
