5 Reasons for Submersible Sand Pump Power Overload
DO PUMP is a professional manufacturer of submersible sand pumps, submersible dredging pumps and submersible slurry pumps. With many years of experience in submersible sand pump production, DO PUMP has become a professional submersible sand pump solution provider. In the process of use, users of submersible sand pumps often encounter submersible sand pump power overload conditions. Now DO PUMP is willing to provide reasons and solutions for submersible sand pump power overload.
1. The design of the submersible sand pump is too large. The submersible sand pump should be designed according to the actual use of the site. The correct design and selection will allow the submersible sand pump to maintain its normal working performance. As the performance increases, submersible sand pumps also require higher power to match.
2. In the design process of the submersible sand pump, the overall pipeline loss and the pressure at the end of the pipeline need to be considered, and the vertical height of the pipeline must also be considered. Higher power is required for matching.
3. The diameter of the pipe does not match the submersible sand pump. The submersible sand pump and the discharge pipeline need to be calculated to match. The pipeline is too thin, the mortar flow rate increases, the pipeline loss increases, the pipeline is too large, the mortar flow rate is too low, and the slurry cannot be sent out. The overload of the submersible sand pump power generally occurs in the pipeline is too thin. Case.
4. The specific gravity of the medium conveyed by the submersible sand pump is too large. The submersible sand pump can be used for different conveying media, fine sand, coarse sand, gravel. According to different media density and slurry concentration, the slurry power required by the submersible sand pump. Different, for example: the submersible sand pump needs to drive less power in the process of conveying fine sand than the power of the submersible sand pump in the case of sand and gravel. Therefore, the submersible sand pump needs to consider higher Drive power.
5. The slurry concentration is too high. According to the field use characteristics of the submersible sand pump, the submersible sand pump can directly contact the sand layer. During the sand pumping process, the adjacent sand layer is prone to collapse. Therefore, the submersible sand pump is prone to instantaneous excessive concentration and increased slurry concentration The motor of the submersible sand pump will be overloaded. Therefore, during the operation of the submersible sand pump, it is recommended to use the motor overload protection or configure the motor current overload alarm device.
China Do Pump is a manufacturer of sand pump. dredge pump, electric submersible sand pump and hydraulic submersible dredge pump with relative dredging equipment.For more dredging pump solutions related to Reasons for Submersible Sand Pump Power Overload, contact Sand Pump Manufacturer China Do Pump at info@dopumpgroup.com or call us at +8615031104888.
