How to use large particle sand dredge pump
Large particle sand suction pump (also known as dredge pump, gravel pump, sand pump) is mainly used for long distance transportation of strong abrasive materials that are too large for the general sand pump to transport. For how to select large particle dredge sand pump? Large particle sand pump is suitable for dredger dredging. , pumping sand, sand pumping, mining and metal smelting and blasting. Because of its good performance, it is also widely used in dredging and dredging in inland rivers.
The large-particle sand-absorbing pump has a wide flow path, and the general impeller has a three-blade structure. The passage is relatively good, and there are many working conditions in which the cobblestone working condition or the domestic garbage in the riverway needs to be cleaned. Anhui Xu Boss undertook the Xiaoqing River Control Project in Jinan, responding to the national green hills and green water policy call, and dredging and dredging the Xiaoqing River. There are many silt and domestic garbage accumulated in the river, and there are many sedimentary stones. The cleaning work is more difficult. In the operation process, the selection of the pump is required to be high, and it is necessary to have sufficient amount of dredging and cleanly clean the domestic garbage and stones. According to the customer's on-site needs and construction needs, the customer selected 14/12G-DOS large-grain sand suction pump for dredging and dredging operations. This pump type has a large flow rate of about 2,500 square meters per hour. The passing performance is good, and the maximum particle size can reach 241 mm. Some domestic garbage and large stones can pass through and will not get stuck in the impeller. Moreover, the over-flow components such as the pump impeller and the pump casing are thickened to increase the wear resistance of the sand suction pump. The service life of the sand suction pump is greatly improved.
After selecting the sand pump, the customer transported the diesel engine that had been used to the factory to the assembly of the entire sand pumping unit and the welding of the base. The speed of the diesel engine and the sand pump are not matched, and the gear box of the appropriate speed ratio is used to adjust the speed. After welding the base, debug the three wires. Perform test machine operation. The diesel engine and the sand suction pump meet the factory requirements after perfect operation. Delivered to customers for acceptance. Contribute a small force for the dredging and remediation of Xiaoqing River.
Large particle suction pump parameters
· Flow rate: 2500 cubic meters / hour
· Lift: 38 meters
·Supporting power: 600KW
· Pump model: 14/12G-DOS
·Maximum overcurrent particles: 241 mm
·Supporting pipe: 14 inch PE pipe
How to select large particle sand pump? For more answers, contact dredge pump for sale - China Do Pump at info@dopumpgroup.com or call us at +8615031104888, 24/7 on line.
