News Digest:Dredge pump for sale - Dragflow sand pump parts, Dragflow pump Italy DRAGFLOW pump accessories - cutter head spray ring and other details. The Dragflow hydraulic cutter head EXHY series can be directly mounted on both sides of the pump body. The hydraulic
Dredge pump for sale - Dragflow sand pump parts
Dragflow pump Italy DRAGFLOW pump accessories - cutter head spray ring and other details
The Dragflow hydraulic cutter head EXHY series can be directly mounted on both sides of the pump body. The hydraulic system of the excavator can handle hard solid materials. The cutter head mounted on the pump body can greatly increase the solid extraction amount.
Features of Dragflow reamer:
The hard sawtooth design of the cutting head reduces wear on the components
Powerful hydraulic motor for powerful torque and long life
The reamer can reach a working depth of 250 meters through the wire rope"
Dragflow water spray ring features:
The high-pressure water spray ring system can be used for dry, high-concentration clay. The electric pump spray ring system can replace the hydraulic cutting hinge head. It is installed on the pump body by a water spray ring frame (can be used for electric pumps). And hydraulic pump), a water pipe with a filter.
Dragflow water spray ring can also be used in sea and mine conditions
Other Accessories:
Mechanical seal: The Telford standard seal system is a combination of lip seals. Double-layer mechanical seals are available as an option for handling hard media and high wear on the pump.
Cooling hood: The Telford pump has a cooling hood in the pump range of 3.7 to 18 kW, which enables the pump to work without being completely submerged. The pump body can be operated from 26 kW to 110 kWh with an external additional cooling hood that can also be completely submerged.
pH: The pump strainer and liner are made of stainless steel (316SS) under strong acid and alkali, and can be used at either PH or high or low. Deforong pumps are suitable for pH values from 2 to 10.
Automatic lubrication system: When the pump is installed in a fixed position or in an inaccessible position, an automatic lubrication system can be installed on the pump body to provide regular automatic lubrication. This operation not only increases the life of the overall sealing system but also greatly reduces the maintenance and inspection of the pump.
Additional outer casing coating: The quality of the Telford pump is cast in a wear-resistant material. For certain specific conditions, the extra hard coating keeps the pump body and wear-resistant consumables extremely long.
Protection of the impermeable membrane: Usually the bottom of the pit is covered with a waterproof plastic film, which may damage the inner wall of the layer during operation of the dredging pump. The Telford pump can be added with a protective ring to protect the membrane from any damage.
Cutter: When the mud is covered with a layer of vegetation, grass or algae, the Telford cutter with a special filter can keep the pump from being blocked.
Anti-turbidity clock: Marine sediments are composed of metals, hydrocarbons, bacteria, chemicals and accumulated debris. Most of the cases are toxic. Debriding without the limitation of turbidity of surrounding water may cause serious damage to marine ecosystems. . The Telford pump has solved this problem by capturing sediments against turbid clocks and preventing turbidity from increasing water.
Sensor: Temperature sensor, built into the motor oil chamber, protects the motor under different operating conditions.
Pump holder: Telford pumps can be used in multiple work areas. The pump frame can be used for high-depth dredging works, piling works or bentonite mud wall works.
