News Digest:What are the sand pumping axis adjustment method? What are the sand pumping axis adjustment method?, The sand pump is a kind of medium with strong abrasion which is suitable for pumping various yellow sand, mineral sand, industrial and mining enterprises
What are the sand pumping axis adjustment method
What are the sand pumping axis adjustment method?, The sand pump is a kind of medium with strong abrasion which is suitable for pumping various yellow sand, mineral sand, industrial and mining enterprises to transport tailings slurry. Because of its energy saving and reliable operation, it is a widely used product. Before the sand pump unit is used or used for a period of time, the axis of the sand pump and the motor or diesel engine will change. If the axes of the two are not adjusted in time, the elastic ring of the coupling pin will be damaged frequently. Back to the broken pump shaft. Therefore, in the case of poor working conditions.
China Do Pump is a manufacturer of sand pump, dredge pump. electric submersible sand pump and hydraulic submersible dredge pump with relative dredging equipment, such as on board dredge pump, ladder dredge pump, booster sand pump.
1. Match the knife edge with the feeler gauge. Find the outer circle of the coupling with the knife edge to ensure that each pair of couplings is flush in all directions, the error should be no more than 0.1mm. Check the gap between each pair of couplings with a feeler gauge, the clearance should be greater than 1mm. However, its error δ (δ=δ1-δ2) is not more than 0.1mm.
2. Use a magnetic dial indicator to match the feeler gauge to find the coupling. Fix the magnetic dial indicator on the outer circumference of the coupling and drive it. The side of the dial indicator is placed on the outer circle of the opposite coupling. The dial indicator beating should not be greater than 0.15mm. Check the gap between each pair of couplings with a feeler gauge. The clearance should be greater than 1mm, but the error δ(δ=δ1-δ2) is not more than 0.1mm.
The above is the method of adjusting the axis in the case of poor working environment, and the machine can be better protected by adjusting the axis, thereby achieving the purpose of prolonging the service life of the product.
For more dredging pump solutions related to What are the sand pumping axis adjustment method, contact Sand Pump Manufacturer China Do Pump at info@dopumpgroup.com or call us at +8615031104888.
