News Digest:Submersible dredge pump, china sand pump, slurry pump parts, Large particle sand pump for mining dredging - China Dredge Pump
Large particle sand pump for mining dredging - China Dredge Pump
Large particle sand pump is mainly used for long-distance conveying of abrasive materials that are too large for general sand pumps. Good flowability, not easy to block, suitable for dredger dredging, river dredging, mining and metal smelting slag and other industries.
Large particle sand pump
The large particle sand pump impeller is mainly composed of three blades, and the maximum passing particle is between 82-254mm. General stone particles or weed refuse are not easy to get stuck in the impeller. Unique impeller curve design adds good passability. At the same time, in view of the strong abrasiveness of large particle media, the entire flow-through component is thickened, and the thickness of the flow-through component is increased while increasing the wear resistance, which further strengthens the wear resistance. The pump is lubricated with butter, and equipped with a water cooling device, which extends the bearing life. The transmission methods include belt transmission, gear reduction box transmission and elastic coupling transmission. There are multiple speeds and connection methods to make the pump run under the best working conditions and can meet a variety of harsh transportation conditions.
The China Mining Dredging project has hundreds of thousands of square feet of tailings particles that need to be treated twice. The tailings pond is located in the middle of the valley. Here tailings are screened waste, but because of the limited technology at that time, the waste ore contained other valuable elements that were not refined. The existing technology can be used for secondary extraction, and the economic value is more objective. deal with. Through understanding, the customer sent the photos and videos of the tailings ore on site to the technicians of our factory. Because the second tailings deposit has been deposited for many years and the ore particles are large, the customer's wishes are to use a sand suction pump to extract the ore to a height of about 30 meters. In the open space, a pulverizer is installed in the open space, and the large particles are crushed and conveyed to the smelting furnace for secondary smelting. In view of the large particles and high conveying height, the technicians recommend to customers for high-lift large-particle sand suction pumps. This type of sand suction pump first has good passability, and the maximum particle size can reach 180 mm. General granular media It can pass without jamming in the impeller. Then there is high head and fast flow rate, which is suitable for the working environment with relatively high altitude. After the pump type is determined, it is the choice of construction method. The materials are accumulated on the ground in the early stage, and basically no water can be used. Therefore, it is recommended that the customer match the high-pressure water pump with high-pressure water to impact the material. The deposited material impacts, which is convenient for the sand pump to pump. After the pump type plan is determined, the customer will hold a meeting to discuss the feasibility plan. Our company sorted out the relevant information of the large particle sand suction pump and the field work video and sent it to the customer for reference.
China Do Pump specializes in R & D, production and sales of large particle sand suction pumps, sand pumps, mud pumps and other equipment. Especially in dredging, sand mining and dyke consolidation, he has rich experience. We have been focusing on sand suction pumps for 20 years. We not only provide high-quality products and overall industry solutions, but also provide on-site installation services. Please contact us at any time for design and equipment issues regarding dredging and sand suction.
Submersible dredge pump, china sand pump, slurry pump parts,Large particle sand pump for mining dredging - China Dredge Pump
