2020-04-14 10:56:13 Source: sand dredge pump-slurry pump parts-China Do Pump
The filter press slurry pump is a matching pump specially used for the feeding and feeding of the filter press. The filter press slurry pump is a special performance filter press slurry pump with a large flow rate and low pressure in the early stage. ; The late press flow is small and the pressure is high; very suitable for the feed performance required by the filter press.
When installing the filter press slurry pump, the motor bolts, pump bolts and bottom corner bolts must be tightened first, and then the coaxiality of the motor and pump should be checked. Use a flat plate or saw blade against the electric pump to make adjustments. Parallel and coaxial, and the gap of the electric pump must be maintained 2-3mm, to lay a good foundation for future commissioning and use, otherwise noise will occur in future experiments and operation, affecting the pump's working efficiency and seriously shortening the use of the pump life.
When the filter press slurry pump is started, the outlet valve should be closed. After starting the motor to run normally, gradually open the outlet valve, and pay attention to the magnitude of the ground current until it reaches the rated current.
Slurry pump of filter press stops working
