News Digest:submersible sand pump, submersible dredge pump, china sand pump, china dredge pump, How To Use Electric Submersible Sand Dredge Pump?
How To Use Electric Submersible Sand Dredge Pump?
China Do Pump is a global manufacture of sand pump, China dredge pump, submersible sand pump, submersible dredge pump, china electric sand pump, china hydraulic dredge pump, electric submersible sand dredge pump, hydraulic submersible sand dredge pump. China Do Pump is also a sand dredging pump solution provider, for this article, Do Pump is going to show how to use electric submersible sand dredge pump.
How to use electric submersible sand dredge pump? - Instruction
1. The direction of rotation of the pump is seen from the water inlet as counterclockwise rotation. If it is reversed, any two wires in the cable must be reversed, and the pump can rotate forward;
2. The pump should be submerged vertically, and it is not allowed. Place the pump horizontally and not fall into the sludge. When the pump is transferred, the power must be cut off;
3. Before the electric pump is stopped, it must be put into clean water and run for a few minutes to prevent deposits in the pump and ensure that the electric pump is clean;
4. When the pump is not used for a long time, the electric pump should be taken out of the water to reduce the chance of damp in the stator winding of the motor and increase the service life of the electric pump;
5. Under normal working conditions, the electric pump works after half a year (if the working intensity is high, it can be advanced to Three months), maintenance should be carried out, the worn and wearing parts should be replaced, the tightening state should be checked, the bearing grease and the insulating oil in the oil chamber should be supplemented or replaced to ensure the good operation of the electric pump;
6. When the water depth exceeds 20 meters , It is recommended to tie floats to the cables at intervals of 1 meter to break the cables when the waterproof pump is running. When transporting in the water for long distances, the water pipes should be tied up with floats at intervals of 5 meters to facilitate movement.
How to use electric submersible sand dredge pump? - Advantages
1. The advanced design agitator stirs up large-size materials that are difficult to extract, and at the same time stirs up other solid materials. The pump is pumped above the solid materials, which can easily extract high-concentration solid materials;
2. High resistance Abrasiveness: Wear-resistant parts are made of high chromium alloy, with high wear resistance;
3. Self-cleaning function: the rotation of the agitator drains large-scale substances to prevent the filter from clogging;
4. The pump's passing capacity: Solid materials with a diameter of 50mm can be extracted.
How to use electric submersible sand dredge pump? - Appications
1. Mixing river sand and sea sand in rivers, rivers, lakes, seas and other waters.
2. Rivers, lakes, reservoirs, hydropower stations, ports and other mud and sand dredging.
3. Discharge of mud and sand, mud, construction drainage, and drainage of mud and sand during bridge pier construction.
4. Cleaning of mud and sand in municipal pipelines and rainwater pumping stations
5. Factory clearing grit pools, mine clearing silos, dredging rivers, seaside sand mining, clearing reservoirs, and washing wells.
6. Remove steel slag, remove waste slag, thermal power plant remove fly ash, discharge tailings, coal washing, beneficiation, gold panning, etc. It is easy to extract and transport after mixing.
How to use electric submersible sand dredge pump? - Conclusion
China Do Pump has shown the sand dredging pump solution with the question of how to use electric submersible sand dredge pump, for more information related to sand dredge pump, contact China Do Pump at info@dopumpgroup.com.
