What are the precautions of sand pump installation?
Sand pump, as its name suggests, is a dredging pump used for sand pumping operations. There are various types of sand pumps, sand pump, dredge pump. electric submersible sand pump and hydraulic submersible dredge pump with relative dredging equipment, such as on board dredge pump, ladder dredge pump, booster sand pump. What are the precautions of sand pump installation?
1. Check all parts for defects. Add two-thirds of the butter to the bearing. Apply a layer of butter on both sides of the paper pad.
2. Apply a butter to the 0-ring seal inside the bushing.
3. After the skeleton oil seal is filled with butter, put it into the mud pump seat and install the bearing.
4. Place the motor on the motor base, then put the paper pad, the oil retaining ring, and install the shaft and the support cylinder with screws.
5. Put the paper pad, install the bearing, bushing, key, pump seat and impeller. After tightening the impeller nut, turn the impeller by hand and turn it flexibly.
6. Put the paper pad on the pump casing, fix it with screws and install the filter. Then pull the impeller by hand and turn it flexibly.
7. Install the key and the driven coupling on the pump shaft, install the key and the active coupling on the motor shaft, and then fix the motor and the motor seat bolt.
For more dredging pump solutions related to What are the precautions of sand pump installation, contact Sand Pump Manufacturer China Do Pump at info@dopumpgroup.com or call us at +8615031104888.
